Usage: Suitable for small and medium-sized motors, transformers, lighting fixtures, etc.
Technical parameters:
Rated voltage: 50/60HZ, 250V, AC
Rated current: 2.5 (1.6) A/10 (6.3) A, COS φ=1.0 (0.6)
Rated disconnect temperature range: 60 ℃~200 ℃, with one step every 5 ℃
Reset temperature range: 30 ℃± 15K below the rated disconnection temperature
Certification: UL, VDE, SGS
Model | S01 | S06 |
Types of contact | Usually closed/usually open | Usually closed/usually open |
Rated switch temperature (NST) every 5 ℃ | 60-200℃ | 70-200℃ |
Standard tolerance | ±5K | ±5K |
Reset temperature range | 30K±15K | 30K±15K |
Using voltage AC power/ Direct current | ...500V~/...100V~= | ...500V~/...100V~= |
Rated voltage, AC | 250V 500V | 250V 500V |
Rated current, AC COS φ=1.0 | 2.5A 0.75A | 10.0A 3.5A |
Rated current, AC COS φ=0.6 | 1.6A 0.50A | 6.3A 2.0A |
Switching times in In and Un situations | 10 | 10 |
The maximum switching current is 250V/switching times | 5.0A/2000 | 25A/2000 |
Contact bounce time | <1ms | <1ms |
Contact resistance (refer to MIL Stand, R5757) | <50mΩ | <50mΩ |
Immersion resistance (according to Thermik test) | suitable | suitable |
The shock resistance is between 10-60Hz | 100m/s2 | 100m/s2 |
Protection level | 1 | 1 |
Standard connection | lead wire 0.25mm2 | lead wire 0.75mm2 |
Diameter d (with/without insulation sleeve) | 9.4/9.0mm | 9.8/9.3mm |
Height h (with/without insulation sleeve) | 4.8/4.3mm | 7.5/7.2mm |
Insulation sleeve length | 16mm | 18 |
